House Rewiring in Garforth, Leeds

If your property is more than 25 years old and hasn't had any electrical work done recently, it’s likely time for an upgrade. You can often spot signs of outdated wiring by looking at your fuse box. If it has a wooden back or uses old-fashioned pull-out fuses, the system is probably past its best. Other red flags include sockets that feel warm to the touch, flickering lights, or circuit breakers that trip for no obvious reason. Older York houses sometimes still have lead or rubber-coated cables, which can perish over time and become a fire risk. If you’re worried, we can carry out a quick safety check to see if your wiring is still up to the job.

Every home is different, but for a typical three-bedroom house in York, the work usually takes between five and ten working days. The time depends on whether the house is empty or full of furniture. If we have to move heavy items or lift carpets in every room, it can add a bit of time to the project. We always plan the work carefully to stay on track and get your home back to normal as quickly as we can.

You don't have to move out, but many people find it easier to stay elsewhere for a few days. Rewiring is a big job that involves lifting floorboards and cutting channels into the walls for new cables, which naturally creates dust and noise. We always make sure you have a working power supply for your fridge and a way to boil the kettle at the end of each day. If you choose to stay, we’ll work around you and do our best to keep the mess to a minimum.

If most of your home wiring is in good condition, a partial rewire might be all you need. This is common when people are putting in a new kitchen or building an extension. We can simply update the circuits in those specific areas and tie them into your existing system. We’ll always take a look at your current setup first and give you honest advice. If the rest of the house is safe, there’s no reason to spend money on a full rewire if you don’t have to.

Yes, a new 18th Edition consumer unit is a core part of any full rewire. This modern board acts as the brain of your electrical system. Unlike old fuse boxes, these units come with RCD and RCBO protection. These devices monitor the electricity flowing through your home and cut the power in a fraction of a second if they detect a fault. It’s one of the single biggest improvements you can make to your family’s safety.

Hiring a NAPIT-approved contractor gives you peace of mind that the person working in your home is fully qualified and regularly inspected. It means our work meets the latest UK safety standards and follows all the necessary building regulations. We can also self-certify the work, which means you won’t have to pay extra for a local authority building inspector to come out and check it. You’ll get all the legal paperwork you need, which is essential if you ever decide to sell your home.

There is no way to avoid some dust when we are chasing cables into plaster or lifting old floorboards. However, we use professional dust extraction equipment and heavy-duty floor protection to keep things as clean as possible. Once we finish, your walls will be ready for a decorator to fill the chases and give the room a fresh look. We take pride in being tidy and we always clear away our clips, wire off-cuts, and rubbish before we leave for the day.

It certainly makes your home easier to sell. Most savvy buyers and surveyors in Yorkshire will look at the electrics before an offer is finalised. If the house needs a full rewire, it can often lead to a lower offer or even cause a sale to fall through. By modernising your electrical system, you’re proving that the house is safe, efficient, and ready for a new owner to move straight in without any hidden costs.